There are 11 products.
Active filters
| Boring Bar | PCLNR/L |
| Cutting Angle | 95° |
| Insert | CN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Pin Lock |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A25R PCLNR/L-12 with cooling holes |
25 | 23 | 200 | 17 | ≥32 | CNM. 1204.. |
| A32S PCLNR/L-12 with cooling holes |
32 | 30 | 250 | 22 | ≥40 | CNM. 1204.. |
| Boring Bar | PWLNR/L |
| Cutting Angle | 95° |
| Insert | WN.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Pin Lock |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Wendeplatte | |
| A25R PWLNR-08 with cooling holes | 25 | 23 | 200 | 17 | ≥32 | WNM. 0804.. |
| A25R PWLNL-08 with cooling holes | 25 | 23 | 200 | 17 | ≥32 | WNM. 0804.. |
| A32S PWLNR-08 with cooling holes | 32 | 30 | 250 | 22 | ≥40 | WNM. 0804.. |
| A32S PWLNL-08 with cooling holes | 32 | 30 | 250 | 22 | ≥40 | WNM. 0804.. |
| Boring Bar | SCLCR/L |
| Cutting Angle | 95° |
| Insert | CC.. |
| Main application | Longitudinal turning, Facing |
| Clamping | Screw Clamping |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A08H SCLCR/L 06 with cooling holes | 8 | 7 | 100 | 07 | ≥11 | CCG./CCM. 06.. |
| A10H SCLCR/L 06 with cooling holes | 10 | 9 | 100 | 08 | ≥13 | CCG./CCM. 06.. |
| A12H SCLCR/L 06 with cooling holes | 12 | 11 | 100 | 10 | ≥16 | CCG./CCM. 06.. |
| A16M SCLCR/L 09 with cooling holes | 16 | 15 | 150 | 13 | ≥21 | CCG./CCM. 09.. |
| A20P SCLCR/L 09 with cooling holes | 20 | 19 | 170 | 15 | ≥25 | CCG./CCM. 09.. |
| A25R SCLCR/L 09 with cooling holes | 25 | 23 | 200 | 19,5 | ≥32 | CCG./CCM. 09.. |
| Boring Bar | SDQCR/L |
| Cutting Angle | 107,5° |
| Insert | DC.. |
| Main application | Profiling |
| Clamping | Screw Clamping |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A10H SDQCR/L-07 with cooling holes | 10 | 09 | 100 | 08 | ≥13 | DCG./DCM. 07.. |
| A12H SDQCR/L-07 with cooling holes | 12 | 11 | 100 | 10 | ≥16 | DCG./DCM. 07.. |
| A16M SDQCR/L-07 with cooling holes | 16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 07.. |
| A16M SDQCR/L-11 with cooling holes |
16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 11.. |
| A20P SDQCR/L-11 with cooling holes |
20 | 18 | 170 | 15 | ≥25 | DCG./DCM. 11.. |
| A25R SDQCR/L-11 with cooling holes |
25 | 23 | 200 | 19,5 | ≥32 | DCG./DCM. 11.. |
| A32S SDQCR/L-11 with cooling holes | 32 | 30 | 250 | 24 | ≥40 | DCG./DCM. 11.. |
| Boring Bar | SDUCR/L |
| Cutting Angle | 93° |
| Insert | DC.. |
| Clamping | Screw Clamping |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A10H SDUCR/L-07 mit IK | 10 | 09 | 100 | 08 | ≥13 | DCG./DCM. 07.. |
| A12H SDUCR/L-07 mit IK | 12 | 11 | 100 | 10 | ≥16 | DCG./DCM. 07.. |
| A16M SDUCR/L-07 mit IK | 16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 07.. |
| A16M SDUCR/L-11 mit IK | 16 | 15 | 150 | 13 | ≥21 | DCG./DCM. 11.. |
| A20P SDUCR/L-11 mit IK | 20 | 18 | 170 | 15 | ≥25 | DCG./DCM. 11.. |
| A25R SDUCR/L-11 mit IK | 25 | 23 | 200 | 19,5 | ≥32 | DCG./DCM. 11.. |
| A32S SDUCR/L-11 mit IK | 32 | 30 | 250 | 24 | ≥40 | DCG./DCM. 11.. |
| Tool Typ | Multifunction Tool |
| Angle | 90° |
| Applications | Longitudinal turning - Facing- Drilling |
| Insert | XC.. |
| Packaging Unit | 1 Pc. |
| d | d1 | d2 | L1 | L2 | L3 | F | |
| SMCR/L 10x2,5 XC..05... | 10 | 12 | 16 | 25 | 32 | 42 | 5 |
| SMCR/L 12x2,5 XC..06... |
12 | 16 | 20 | 30 | 40 | 45 | 6 |
| SMCR/L 16x2,5 XC..08... |
16 | 20 | 25 | 40 | 53 | 50 | 8 |
| SMCR/L 20x2,5 XC..10... |
20 | 25 | 34 | 50 | 66 | 55 | 10 |
| SMCR/L 25x2,5 XC..13.. |
25 | 25 | 34 | 62,5 | 80 | 55 | 12,5 |
| SMCR/L 32x2,5 XC..17... |
32 | 32 |
44 |
80 | 95 |
60 |
16 |
| Boring Bar | PSKNR/L |
| Cutting Angle | 75° |
| Insert | SN.. |
| Main application | Longitudinal turning |
| Clamping | Pin Lock |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A25R PSKNR-12 | 25 | 23 | 200 | 17 | ≥32 | SNM. 1204.. |
| A25R PSKNL-12 | 25 | 23 | 200 | 17 | ≥32 | SNM. 1204.. |
| A32S PSKNR-12 | 32 | 30 | 250 | 22 | ≥40 |
SNM. 1204.. |
| A32S PSKNL-12 | 32 | 30 | 250 | 22 | ≥40 | SNM. 1204.. |
| Boring Bar | E-SDQCR/L |
| Setting Angle | 107,5° |
| Insert | DC.. |
| Main application | Profile turning |
| Clamping | Screw Clamp |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
Solid carbide boring bar
Solid carbide tool carriers increase stability considerably.
The carbide boring bar allows a projection length of up to 6xD by reducing vibrations.
Precision and surface quality are also improved.
| d | L | f | D/min | |
| E10M SDQCR/L-07 with cooling holes | 10 | 150 | 08 | ≥13 |
| E12Q SDQCR/L-07 with cooling holes | 12 | 180 | 10 | ≥16 |
| E16R SDQCR/L-11 with cooling holes | 16 | 200 | 13 | ≥21 |
| Boring Bar | E-SCLCR/L |
| Setting Angle | 95° |
| Insert | CC.. |
| Main application | Longitudinal turning, facing |
| Clamping | Screw Clamp |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
Solid carbide boring bar
Solid carbide tool carriers increase stability considerably.
The carbide boring bar allows a projection length of up to 6xD by reducing vibrations.
Precision and surface quality are also improved.
| d | L | f | Dmin | |
| E08K SCLCR/L 06 with cooling holes | 8 | 125 | 06 | ≥11 |
| E10M SCLCR/L 06 with cooling holes | 10 | 150 | 08 | ≥13 |
| E12Q SCLCR/L 06 with cooling holes | 12 | 180 | 10 | ≥16 |
| E16R SCLCR/L 09 with cooling holes | 16 | 200 | 13 | ≥21 |
| Boring Bar | E-SDUCR/L |
| Setting Angle | 93° |
| Insert | DC.. |
| Main application | Profile turning |
| Clamping | Screw Clamp |
| Cooling | With internal coolant feed |
| Packaging unit | 1 Pc. |
Solid carbide boring bar
Solid carbide tool carriers increase stability considerably.
The carbide boring bar allows a projection length of up to 6xD by reducing vibrations.
Precision and surface quality are also improved.
| d | L | f | Dmin | |
| E10M SDUCR/L-07 | 10 | 150 | 08 | ≥13 |
| E12Q SDUCR/L-07 | 12 | 180 | 10 | ≥16 |
| E16R SDUCR/L-11 | 16 | 200 | 13 | ≥21 |
| E20S SDUCR/L-11 | 20 | 250 | 15 | ≥25 |
| Boring Bar | PDUNR/L |
| Cutting Angle | 93° |
| Insert | DN.. |
| Main application | Profiling |
| Clamping | Pin Lock |
| Cooling | With Cooling Holes |
| Packaging unit | 1 Pc. |
| d | h | L | f | Dmin | Insert | |
| A25R PDUNR 11 | 25 | 24 | 200 | 17 | ≥32 | DNM. 11.. |
| A25R PDUNL 11 | 25 | 24 | 200 | 17 | ≥32 | DNM. 11.. |
| A32S PDUNR 15 | 32 | 30 | 250 | 22 | ≥40 | DNM. 15.. |
| A32S PDUNL 15 | 32 | 30 | 250 | 22 | ≥40 | DNM. 15.. |
English
Deutsch
