Error!

Solid Carbide Mills

Solid Carbide Mills

No minimum order Value

Free Shipping

We ship free of charge from 150€

Telephone order and advice

Tel.: +49 (0)208 - 848 67 82

Active filters

  • Materials: NF-Metals

VHM-Fasfräser 60°

Price ab €11.50
Availability: 2147483643 In Stock
Mill Typ Solid Carbide Chamfer Mill 
Angle 60°
Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Shaft Weldon
Coating RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

  d(h6) L D Shank X Teeths
FF-Z3-60-D3.0 RT303 3 48 0,2 HA 60° 3
FF-Z4-60-D4.0 RT303 4 48 0,2 HA 60° 4
FF-Z4-60-D6.0 RT303 6 55 0,2
HB
60° 4
FF-Z4-60-D8.0 RT303 8 58 0,5
HB
60°
4
FF-Z4-60-D10.0 RT303 10 65 0,5
HB
60°
4
FF-Z6-60-D10.0 RT303 10 65 0,7
HB
60°
6
FF-Z4-60-D12.0 RT303 12 75 0,5
HB
60° 4
FF-Z6-60-D12.0 RT303 12 75 0,7 HB 60° 6
FF-Z4-60-D16.0 RT303 16 85 0,7 HB 60° 4
FF-Z6-60-D16.0 RT303 16 85 0,7 HB 60° 6

Solide Carbide Chamfer Mills 90°

Price ab €13.50
Availability: 2147483563 In Stock
Mill Typ Solid Carbide Chamfer Mill 
Angle 90°
Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Shaft Weldon/Cylinder Shaft
Coating RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

d(h6) L D Shaft X Teeth
FF-Z3-90-D3.0-W RT303 3 48 0,2 Weldon 90° 3
FF-Z4-90-D4.0-W RT303 4 48 0,2 Weldon 90° 4
FF-Z4-90-D6.0-W RT303 6 55 0,2 Weldon 90° 4
FF-Z4-90-D8.0-W RT303 8 58 0,5 Weldon 90° 4
FF-Z4-90-D10.0-W RT303 10 65 0,5 Weldon 90° 4
FF-Z4-90-D12.0-W RT303 12 75 0,5 Weldon 90° 4
FF-Z4-90-D16.0-W RT303 16 85 0,7 Weldon 90° 4
FF-Z3-90-D3.0-Z RT303 3 48 0,2 Cylinder Shaft 90° 3
FF-Z4-90-D4.0-Z RT303 4 48 0,2 Cylinder Shaft 90° 4
FF-Z4-90-D6.0-Z RT303 6 55 0,2 Cylinder Shaft 90° 4
FF-Z4-90-D8.0-Z RT303 8 58 0,5 Cylinder Shaft 90° 4
FF-Z4-90-D10.0-Z RT303 10 65 0,5 Cylinder Shaft 90° 4
FF-Z4-90-D12.0-Z RT303 12 75 0,5 Cylinder Shaft 90° 4
FF-Z4-90-D16.0-Z RT303 16 85 0,7 Cylinder Shaft 90° 4

Solide Carbide Chamfer Mills / 120°

Price ab €11.50
Availability: 2147483646 In Stock
Mill Typ Solid Carbide Chamfer Mill 
Angle 120°
Material Steel, Stainless Steel,  Cast Iron, NF-Materials
Shaft Weldon
Coating RT303: PVD-coated fine-grain carbide
for general Application in milling (VHM)
Packaging unit 1 Pc.

   

  d(h6) L D Shank X Teeth
FF-Z3-120-D3.0 RT303 3 48 0,2 HA 120° 3
FF-Z4-120-D4.0 RT303 4 48 0,2 HA 120° 4
FF-Z4-120-D6.0 RT303 6 55 0,2
HB
120° 4
FF-Z4-120-D8.0 RT303 8 58 0,5
HB
120°
4
FF-Z4-120-D10.0 RT303 10 65 0,5
HB
120°
4
FF-Z4-120-D12.0 RT303 12 75 0,5
HB
120°
4
FF-Z4-120-D16.0 RT303 16 85 0,7
HB
120° 4

Solid Carbide End Mill ALU 1 Flute

Price ab €9.70
Availability: 2147483644 In Stock
Mill Typ Solid Carbide End mill for Alu
Spiral Angle 30°
Material NF-Materials
Lenght Standard Lenght
Shaft Cylinder Shaft
Flutes 1
Coating RT30K: Uncoated K30 carbide substrate
for processing non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen    

- cutting across the middle

  Z D d H
L
AF-Z1-D2.0 RT30K 1 2,0 3 8 50
AF-Z1-D3.0 RT30K 1 3,0 3 12 50
AF-Z1-D4.0 RT30K 1 4,0 4 15 60
AF-Z1-D5.0 RT30K 1 5,0 5 17 60
AF-Z1-D6.0 RT30K 1 6,0 6 20 65
AF-Z1-D8.0 RT30K 1 8,0 8 22 65
AF-Z1-D10.0 RT30K 1 10,0 10 25 75
AF-Z1-D12.0 RT30K 1 12,0 12 30 80

Solid Carbide End Mill ALU 2 Flutes

Price ab €8.50
Availability: 2147483646 In Stock
Mill Typ Solid Carbide End mill  ALU
Spiral Angle 55°
Material NE-Metalle
Lenght Standard Lenght
Shaft Cylindrical Shaft
Flutes 2
Coating RT30K: Uncoated K30 carbide substrate for
machining steel, cast iron and non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 2 flute solid carbideEnd Mill ALU
- cutting across the middle

  D d(h6) H L Teeths Geometry
AF-Z2-D1.0 RT30K 1 4 3 50 2 A
AF-Z2-D1.5 RT30K 1,5 4 4 50 2 A
AF-Z2-D2.0 RT30K 2 4 6 50 2 A
AF-Z2-D2.5 RT30K 2,5 4 7 50 2 A
AF-Z2-D3.0 RT30K 3 6 9 50 2 A
AF-Z2-D4.0 RT30K 4 6 12 50 2 A
AF-Z2-D5.0 RT30K 5 6 15 50 2 A
AF-Z2-D6.0 RT30K 6 6 18 60 2 B
AF-Z2-D8.0 RT30K 8 8 20 60 2 B
AF-Z2-D10.0 RT30K 10 10 30 75 2 B
AF-Z2-D12.0 RT30K 12 12 32 75 2 B
AF-Z2-D16.0 RT30K 16 16 45 100 2 B
AF-Z2-D20.0 RT30K 20 20 45 100 2 B

Solid Carbide End Mill ALU 2 Flutes Long Version

Price ab €11.90
Availability: 2147483644 In Stock
Mill Typ Solid Carbide End mill  ALU
Spiral Angle 55°
Material NE-Metalle
Lenght Long Version
Shaft Cylindrical Shaft
Flutes 2
Coating RT30K: Uncoated K30 carbide substrate for
machining steel, cast iron and non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 2 flute solid carbideEnd Mill ALU
- cutting across the middle

  D d(h6) H L Teeths Geometry
AFL-Z2-D3.0 RT30K 3 6 12 60 2 A
AFL-Z2-D4.0 RT30K 4 6 16 60 2 A
AFL-Z2-D5.0 RT30K 5 6 20 60 2 A
AFL-Z2-D6.0 RT30K 6 6 25 75 2 B
AFL-Z2-D8.0 RT30K 8 8 32 75 2 B
AFL-Z2-D10.0 RT30K 10 10 45 100 2 B
AFL-Z2-D12.0 RT30K 12 12 45 100 2 B
AFL-Z2-D16.0 RT30K 16 16 65 150 2 B
AFL-Z2-D20.0 RT30K 20 20 75 150 2 B

Solid Carbide End Mill 3 Teeths Standard ALU

Price ab €12.70
Availability: 2147483625 In Stock
Mill Typ Solid Carbide End mill  ALU
Spiral Angle 30°
Material NF-Materials
Lenght Standard Lenght
Shaft Cylindrical Shaft
Flutes 3
Coating RT30K: Uncoated K30 carbide substrate for
machining steel, cast iron and non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 3 flute solid carbideEnd Mill ALU
- cutting across the middle

  D d(h6) H L Teeth Geometry
AF-Z3-D2.0 RT30K 2 4 6 50 3 A
AF-Z3-D3.0 RT30K 3 6 9 50 3 A
AF-Z3-D4.0 RT30K 4 6 12 50 3 A
AF-Z3-D5.0 RT30K 5 6 15 50 3 A
AF-Z3-D6.0 RT30K 6 6 18 60
3 B
AF-Z3-D8.0 RT30K 8 8 20 60 3
B
AF-Z3-D10.0 RT30K 10 10 30 75
3
B
AF-Z3-D12.0 RT30K 12 12 32 75
3
B
AF-Z3-D16.0 RT30K 16 16 45 100
3
B
AF-Z3-D20.0 RT30K 20 20 45 100 3 B

Solid Carbide End Mill 3 Flutes Long Version ALU

Price ab €12.90
Availability: 2147483639 In Stock
Mill Typ Solid Carbide End mill  ALU
Spiral Angle 45°
Material NE-Metalle
Lenght Long Version
Shaft Cylindrical Shaft
Flutes 3
Coating RT30K: Uncoated K30 carbide substrate for
machining steel, cast iron and non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 3 flute solid carbideEnd Mill ALU
- cutting across the middle

  D d(h6) H L Teeth Geometry
AFL-Z3-D3.0 RT30K 3 6 12 60 3 A
AFL-Z3-D4.0 RT30K 4 6 16 60 3 A
AFL-Z3-D5.0 RT30K 5 6 20 60 3 A
AFL-Z3-D6.0 RT30K 6 6 25 75 3 B
AFL-Z3-D8.0 RT30K 8 8 32 75
3
B
AFL-Z3-D10.0 RT30K 10 10 45 100
3
B
AFL-Z3-D12.0 RT30K 12 12 45 100
3
B
AFL-Z3-D16.0 RT30K 16 16 65 150
3
B
AFL-Z3-D20.0 RT30K 20 20 75 150 3 B

Solid Carbide Ball Nosed Cutter for non ferrite...

Price ab €17.00
Availability: 2147483645 In Stock
Mill Typ Solid Carbide Ball Nosed Cutter  ALU
Spiral Angle 30°
Material NF-Materials
Lenght Standard Lenght
Shaft Cylindrical Shaft
Teeth 2
Coating RT30K: Uncoated K30 carbide substrate for
machining steel, cast iron and non-ferrous metals
Packaging unit 1 Pc

  Eckfräsen      

 

- 2 flute solid carbide Ball Nosed Cutter ALU
- cutting across the middle

  D R d2(h6) d1 H M L Z
AKF-Z2-D3.0 RT30K 3 1,5 6 2,8 6 9 57 2
AKF-Z2-D4.0 RT30K 4 2 6 3,7 8 12 57 2
AKF-Z2-D5.0 RT30K 5 2,5 6 4,6 10 15 57 2
AKF-Z2-D6.0 RT30K 6 3 6 5,5 12 20 57 2
AKF-Z2-D8.0 RT30K 8 4 8 7,4 16 26 63 2
AKF-Z2-D10.0 RT30K 10 5 10 9,2 20 31 72 2
AKF-Z2-D12.0 RT30K 12 6 12 11 24 37 83 2
AKF-Z2-D16.0 RT30K 16 8 16 15 32 43 92 2

Solid Carbide Ball Nosed Cutter long version...

Price ab €19.00
Availability: 2147483642 In Stock
Mill Typ Solid Carbide Ball Nosed Cutter  ALU
Spiral Angle 30°
Material NF-Materials
Lenght Long Version
Shaft Cylindrical Shaft
Teeth 2
Coating RT30K: Uncoated K30 carbide substrate for
machining steel, cast iron and non-ferrous metals
Packaging unit 1 Pc

  Eckfräsen      

 

- 2 flute solid carbide Ball Nosed Cutter ALU
- cutting across the middle

  D R d2(h6) d1 H M L Z
AKFL-Z2-D3.0 RT30K 3 1,5 6 2,8 6 9 75 2
AKFL-Z2-D4.0 RT30K 4 2 6 3,7 8 12 75 2
AKFL-Z2-D5.0 RT30K 5 2,5 6 4,6 10 15 80 2
AKFL-Z2-D6.0 RT30K 6 3 6 5,5 12 20 80 2
AKFL-Z2-D8.0 RT30K 8 4 8 7,4 16 26 90 2
AKFL-Z2-D10.0 RT30K 10 5 10 9,2 20 31 100 2
AKFL-Z2-D12.0 RT30K 12 6 12 11 24 37 120 2
AKFL-Z2-D16.0 RT30K 16 8 16 15 32 43 140 2

Solid carbide aluminum roughing Mill, 3 Flutes

Price ab €23.90
Availability: 2147483646 In Stock
Mill Typ Solid Carbide End mill Roughing for Alu
Spiral Angle 30°
Material NF-Materials
Processing Roughing
Shaft Cylinder Shaft
Flutes 3
Coating RT30K: Uncoated K30 carbide substrate
for processing non-ferrous metals
Packaging unit 1 Pc

   Eckfräsen   

 

- cutting across the middle

D d H L Corner bevel
AFR-Z3-D6.0 RT30K 6,0 6 16 57 0,60
AFR-Z3-D7.0 RT30K 7,0 8 16 63 0,60
AFR-Z3-D8.0 RT30K 8,0 8 16 63 0,60
AFR-Z3-D9.0 RT30K
9,0 10 19 72 0,60
AFR-Z3-D10.0 RT30K 10,0 10 22 72 0,60
AFR-Z3-D12.0 RT30K
12,0 12 26 83 0,60
AFR-Z3-D14.0 RT30K 14,0 14 26 83 0,91
AFR-Z3-D16.0 RT30K 16,0 16 32 92 0,91
AFR-Z3-D18.0 RT30K 18,0 18 32 92 0,91
AFR-Z3-D20.0 RT30K 20,0 20 38 104 0,91
AFR-Z3-D25.0 RT30K 25,0 25 45 121 0,91

Solid Carbide End Mill ALU 3 Flutes (DLC)

Price ab €15.60
Availability: 2147483644 In Stock
Mill Typ Solid Carbide End mill  ALU (DLC)
Spiral Angle 37°
Material NF-Materials
Lenght Standard Lenght
Shaft Cylindrical Shaft
Flutes 3
Coating RT30K: The DLC coating (Diamond-Like-Carbon)
made of diamond-like carbon ensures less wear.
Packaging unit 1 Pc

 Eckfräsen    

 

- cutting across the middle

D d H L
AF-Z3-D3.0 RT107 3,0 6 8 52
AF-Z3-D4.0 RT107 4,0 6 11 55
AF-Z3-D5.0 RT107 5,0 6 13 57
AF-Z3-D6.0 RT107 6,0 6 13 57
AF-Z3-D8.0 RT107 8,0 8 19
63
AF-Z3-D10.0 RT107 10,0 10 22
72
AF-Z3-D12.0 RT107 12,0 12 26
83
AF-Z3-D16.0 RT107 16,0 16 32
92
AF-Z3-D20.0 RT107 20,0 20 38 104

Solid Carbide End Mill ALU 3 Flutes Long...

Price ab €27.60
Availability: 2147483645 In Stock
Mill Typ Solid Carbide End mill  ALU (DLC)
Spiral Angle 37°
Material NF-Materials
Lenght Long version
Shaft Cylindrical Shaft
Flutes 3
Coating RT30K: The DLC coating (Diamond-Like-Carbon)
made of diamond-like carbon ensures less wear.
Packaging unit 1 Pc

 Eckfräsen    

 

- cutting across the middle

D d H L
AFL-Z3-D6.0 RT107 6,0 6 24 75
AFL-Z3-D8.0 RT107 8,0 8 32 75
AFL-Z3-D10.0 RT107 10,0 10 40 100
AFL-Z3-D12.0 RT107 12,0 12 48
100
AFL-Z3-D16.0 RT107 16,0 16 64 125
AFL-Z3-D20.0 RT107 20,0 20 80
150
AFL-Z3-D25.0 RT107 25,0 25 50 125

Solid Carbide End Mill ALU 3 -Flute Helix...

Price ab €23.90
Availability: 2147483646 In Stock
Mill Typ Solid Carbide End mill ALU with Corner radius (DLC)
Spiral Angle 37°
Material NF-Materials
Lenght Standard Lenght
Shaft Cylindrical Shaft
Flutes 3
Coating RT30K: The DLC coating (Diamond-Like-Carbon)
made of diamond-like carbon ensures less wear.
Packaging unit 1 Pc

 Eckfräsen     

 

- cutting across the middle

r D d H L
AF-Z3-D6.0-R0,5 RT107 R0,5 6,0 6 13 57
AF-Z3-D6.0-R1,0 RT107 R1,0 6,0 6 13 57
AF-Z3-D6.0-R1,5 RT107 R1,5 6,0 6 13 57
AF-Z3-D8.0-R0,3 RT107 R0,3 8,0 8 19 63
AF-Z3-D8.0-R0,5 RT107 R0,5 8,0 8 19
63
AF-Z3-D8.0-R1,0 RT107 R1,0 8,0 8 19 63
AF-Z3-D8.0-R1,5 RT107 R1,5 8,0 8 19
63
AF-Z3-D10.0-R0,3 RT107 R0,3 10,0 10 22
72
AF-Z3-D10.0-R0,5 RT107 R0,5 10,0 10 22
72
AF-Z3-D10.0-R1,0 RT107 R1,0 10,0 10 22 72
AF-Z3-D10.0-R1,5 RT107 R1,5 10,0 10 22 72
AF-Z3-D12.0-R1,5 RT107 R1,5 12,0 12 26 83
AF-Z3-D12.0-R2,0 RT107 R2,0 12,0 12 26 83
AF-Z3-D12.0-R2,5 RT107 R2,5 12,0 12 26 83
AF-Z3-D12.0-R3,0 RT107 R3,0 12,0 12 26 83
AF-Z3-D16.0-R1,5 RT107 R1,5 16,0 16 32 92
AF-Z3-D16.0-R2,0 RT107 R2,0 16,0 16 32 92
AF-Z3-D16.0-R2,5 RT107 R2,5 16,0 16 32 92
AF-Z3-D16.0-R3,0 RT107 R3,0 16,0 16 32 92
AF-Z3-D16.0-R4,0 RT107 R4,0 16,0 16 32 92
AF-Z3-D20.0-R2,0 RT107 R2,0 20,0 20 38 104
AF-Z3-D20.0-R2,5 RT107 R2,5 20,0 20 38 104
AF-Z3-D20.0-R3,0 RT107 R3,0 20,0 20 38 104
AF-Z3-D20.0-R4,0 RT107 R4,0 20,0 20 38 104

Solid Carbide End Mill ALU 3-Flute Helix Corner...

Price ab €31.10
Availability: 2147483641 In Stock
Mill Typ Solid Carbide End mill ALU with Corner radius (DLC)
Spiral Angle 37°
Material NF-Materials
Lenght Long Version
Shaft Cylindrical Shaft
Flutes 3
Coating RT30K: The DLC coating (Diamond-Like-Carbon)
made of diamond-like carbon ensures less wear.
Packaging unit 1 Pc

 Eckfräsen     

 

- cutting across the middle

r D d H L
AFL-Z3-D6.0-R0,5 RT107 R0,5 6,0 6 24 75
AFL-Z3-D6.0-R1,0 RT107 R1,0 6,0 6 24 75
AFL-Z3-D8.0-R0,5 RT107 R0,5 8,0 8 32
75
AFL-Z3-D8.0-R1,0 RT107 R1,0 8,0 8 32 75
AFL-Z3-D8.0-R1,5 RT107 R1,5 8,0 8 32
75
AFL-Z3-D8.0-R2,0 RT107 R2,0 8,0 8 32 75
AFL-Z3-D10.0-R0,5 RT107 R0,5 10,0 10 40
100
AFL-Z3-D10.0-R1,0 RT107 R1,0 10,0 10 40 100
AFL-Z3-D10.0-R1,5 RT107 R1,5 10,0 10 40 100
AFL-Z3-D10.0-R2,0 RT107 R2,0 10,0 10 40 100
AFL-Z3-D12.0-R0,5 RT107 R0,5 12,0 12 48 100
AFL-Z3-D12.0-R1,0 RT107 R1,0 12,0 12 48 100
AFL-Z3-D12.0-R1,5 RT107 R1,5 12,0 12 48 100
AFL-Z3-D12.0-R2,0 RT107 R2,0 12,0 12 48 100
AFL-Z3-D12.0-R2,5 RT107 R2,5 12,0 12 48 100
AFL-Z3-D12.0-R3,0 RT107 R3,0 12,0 12 48 100
AFL-Z3-D16.0-R0,5 RT107 R0,5 16,0 16 64 125
AFL-Z3-D16.0-R1,0 RT107 R1,0 16,0 16 64 125
AFL-Z3-D16.0-R1,5 RT107 R1,5 16,0 16 64 125
AFL-Z3-D16.0-R2,0 RT107 R2,0 16,0 16 64 125
AFL-Z3-D16.0-R2,5 RT107 R2,5 16,0 16 64 125
AFL-Z3-D16.0-R3,0 RT107 R3,0 16,0 16 64 125
AFL-Z3-D16.0-R4,0 RT107 R4,0 16,0 16 64 125
AFL-Z3-D20.0-R0,5 RT107 R0,5 20,0 20 80 150
AFL-Z3-D20.0-R1,0 RT107 R1,0 20,0 20 80 150
AFL-Z3-D20.0-R1,5 RT107 R1,5 20,0 20 80 150
AFL-Z3-D20.0-R2,0 RT107 R2,0 20,0 20 80 150
AFL-Z3-D20.0-R2,5 RT107 R2,5 20,0 20 80 150
AFL-Z3-D20.0-R3,0 RT107 R3,0 20,0 20 80 150
AFL-Z3-D20.0-R4,0 RT107 R4,0 20,0 20 80 150

Solid carbide quarter circle milling cutter

Price ab €18.50
Availability: 2147483647 In Stock
Mill Typ Solid Carbide quarter circle milling cutter
Spiral Angle
Material Steel, Stainless Steel, Cast Iron, NF-Materials
Lenght Standard Lenght
Shaft Weldon Shaft
Teeth 4
Coating RT303: PVD-coated fine-grain carbide for
general Application in milling (VHM)
Packaging unit 1 Pc

   

- 4 flute solid carbide quarter circle milling Cutter
- not cutting across the middle
- PVD-coated

  d(h6) L D R Teeth
VKF-Z4-D6.0-R0.2 RT303 6 60 5,6 0,2 4
VKF-Z4-D6.0-R0.3 RT303 6 60 5,4 0,3 4
VKF-Z4-D6.0-R0.4 RT303 6 60 5,2 0,4 4
VKF-Z4-D8.0-R0.5 RT303 8 70 7 0,5 4
VKF-Z4-D8.0-R0.6 RT303 8 70 6,8 0,6 4
VKF-Z4-D8.0-R0.75 RT303 8 70 6,5 0,75 4
VKF-Z4-D8.0-R0.8 RT303 8 70 6,4 0,8 4
VKF-Z4-D8.0-R1.0 RT303 8 70 6 1 4
VKF-Z4-D10.0-R1.5 RT303 10 75 7 1,5 4
VKF-Z4-D10.0-R2.0 RT303 10 75 6 2 4
VKF-Z4-D12.0-R2.5 RT303 12 75 7 2,5 4
VKF-Z4-D12.0-R3.0 RT303 12 75 6 3 4
VKF-Z4-D16.0-R4.0 RT303 16 80 8 4 4
VKF-Z4-D20.0-R5.0 RT303 20 80 10 5 4

Solid Carbide End Mill 3 Flutes ALU - Extra...

Price ab €11.50
Availability: 2147483647 In Stock
Mill Typ Solid Carbide End mill  ALU
Spiral Angle 45°
Material NE-Metalle
Lenght Extra Long Shank
Shaft Cylindrical Shaft
Flutes 3
Coating RT30K: Uncoated K30 carbide substrate for
machining steel, cast iron and non-ferrous metals
Packaging unit 1 Pc

 Eckfräsen        

 

- 3 flute solid carbideEnd Mill ALU
- cutting across the middle

D d(h6) H L Flutes
AFEL-P-D6.0 RT30K 6 6 16 100 3
AFEL-P-D8.0 RT30K 8 8 20 100 3
AFEL-P-D10.0 RT30K 10 10 25 150 3
AFEL-P-D12.0 RT30K 12 12 30 150 3

Product added to compare.