We ship free of charge from 150€
Tel.: +49 (0)208 - 848 67 82
There are 16 products.
| Grooving Insert | MGGN |
| Materials | Hard Materials |
| Coating | RTC20=CBN fine grain grade for grooving in hardened steel, also in interrupted cut |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 1 Pc. |
| B | R | L | S | Scope of application | |
| MGGN 200-CBN RTC20 | 2 | 0,2 | 16 | 4,8 | Hard Materials |
| MGGN 300-CBN RTC20 | 3 | 0,4 | 21 | 4,8 | Hard Materials |
| Grooving Insert | MGMN |
| Materials | Steel and Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving & grooving with excellent chip control
| B | R | L | S | Scope of application | |
| MGMN 300-GT RT300 | 3 | 0,4 | 21 | 4,8 | Steel and Stainless Steel |
| MGMN 400-GT RT300 | 4 | 0,4 | 21 | 4,8 | Steel and Stainless Steel |
| Grooving Insert | MGMN |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving, for universal use
| B | R | L | S | Scope of application | |
| MGMN 200-M RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & STAINLESS STEEL |
| MGMN 300-M RT300 | 3 | 0,4 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 400-M RT300 | 4 | 0,4 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 500-M RT300 | 5 | 0,8 | 26 | 5,8 | STEEL & STAINLESS STEEL |
| Grooving Insert | MRMN... |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving, for universal use
| B | R | L | S | |
| MRMN 200-M RT300 | 2 | 1 | 16 | 3,5 |
| MRMN 300-M RT300 | 3 | 1,5 | 21 | 4,8 |
| MRMN 400-M RT300 | 4 | 2 | 21 | 4,8 |
| MRMN 500-M RT300 | 5 | 2,5 | 25,85 | 5,8 |
| Grooving Insert | MGMN... |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Soft-cutting geometry, grooving and parting off
| B | R | L | S | Scope of application | |
| MGMN 200-J RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & STAINLESS STEEL |
| MGMN 300-J RT300 | 3 | 0,2 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 400-J RT300 | 4 | 0,3 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 500-J RT300 | 5 | 0,3 | 26 | 4,8 | STEEL & STAINLESS STEEL |
| Grooving Insert | MGMR |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Soft-cutting geometry, grooving and parting off
| B | R | L | S | Scope of application | |
| MGMR 200-J 6D RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & STAINLESS STEEL |
| MGMR 300-J 6D RT300 | 3 | 0,2 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| Grooving Insert | MGMN |
| Materials | Steel/Cast Iron |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Stable cutting edge, grooving even with interrupted cuts
| B | R | L | S | Scope of application | |
| MGMN 200-C RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & CAST IRON |
| MGMN 300-C RT300 | 3 | 0,4 | 21 | 4,9 | STEEL & CAST IRON |
| MGMN 400-C RT300 | 4 | 0,4 | 21 | 4,9 | STEEL & CAST IRON |
| MGMN 500-C RT300 | 5 | 0,4 | 26 | 5,8 | STEEL & CAST IRON |
| Grooving Insert | MGMN |
| Materials | NF-Materials |
| Coating | RT100 = Uncoated K10-K15 carbide for ALU and plastics |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Ground, sharp cutting edge with large rake angle
| B | R | L | S | Cutting Data | |
| MGMN 200-AL RT100 | 2 | 0,2 | 16 | 3,5 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| MGMN 300-AL RT100 | 3 | 0,4 | 21 | 4,8 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| MGMN 400-AL RT100 | 4 | 0,4 | 21 | 4,8 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| MGMN 500-AL RT100 | 5 | 0,8 | 26 | 5,8 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| Grooving Holder | BDKT-A-MGMN |
| Application | Axial Grooving |
| Grooving System | MGM./MRM.-System |
| Grooving Insert | MGMN/MGMR/MRMN... |
| Packaging Unit | 1 Pc. |
Axial grooving holder optionally for 3mm or 4mm grooving width in the various diameter ranges according to the table.
| h | B | L | S | tMax | DMin | DMax | |
| BDKT-A 2525-K3C (Ø24-36) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 24 | 36 |
| BDKT-A 2525-K3C (Ø36-48) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 36 | 48 |
| BDKT-A 2525-K3C (Ø48-70) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 48 | 70 |
| BDKT-A 2525-K3C (Ø70-110) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 70 | 110 |
| BDKT-A 2525-K3C (Ø100-150) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 100 | 150 |
| BDKT-A 2525-K3C (Ø150-200) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 150 | 200 |
| BDKT-A 2525-K3C (Ø200-350) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 200 | 350 |
| BDKT-A 2525-K3C (Ø300-500) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 300 | 500 |
| BDKT-A 2525-K4C (Ø24-36) t max:22 | 25 | 25 | 150 | 26,5 | 22 | 24 | 36 |
| BDKT-A 2525-K4C (Ø36-48) t max:22 | 25 | 25 | 150 | 26,5 | 22 | 36 | 48 |
| BDKT-A 2525-K4C (Ø48-70) t max:22 | 25 | 25 | 150 | 26,5 | 22 | 48 | 70 |
| BDKT-A 2525-K4C (Ø70-110) t max:22 | 25 | 25 | 150 | 26,5 | 22 | 70 | 110 |
| BDKT-A 2525-K4C (Ø100-150) t max:22 | 25 | 25 | 150 | 26,5 | 22 | 100 | 150 |
| BDKT-A 2525-K4C (Ø150-200) t max:22 | 25 | 25 | 150 | 26,5 | 22 | 150 | 200 |
| BDKT-A 2525-K4C (Ø200-350) t max:22 | 25 | 25 | 150 | 26,5 | 22 | 200 | 350 |
| BDKT-A 2525-K4C (Ø300-500) t max:22 | 25 | 25 | 150 | 26,5 | 22 | 300 | 500 |
| Grooving Holder | BDKT-LT-MGMN |
| Application | Axial Grooving |
| Grooving System | MGM./MRM.-System |
| Grooving Insert | MGMN/MGMR/MRMN... |
| Packaging Unit | 1 Pc. |
90° cranked axial grooving holder optionally for 3mm or 4mm grooving width in the various diameter ranges according to the table.
| h | B | L | S | tMax | DMin | DMax | |
| BDKT-LT 2525-K3C (Ø24-36) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 24 | 36 |
| BDKT-LT 2525-K3C (Ø36-48) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 36 | 48 |
| BDKT-LT 2525-K3C (Ø48-70) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 48 | 70 |
| BDKT-LT 2525-K3C (Ø70-110) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 70 | 110 |
| BDKT-LT 2525-K3C (Ø100-150) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 100 | 150 |
| BDKT-LT 2525-K3C (Ø150-200) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 150 | 200 |
| BDKT-LT 2525-K3C (Ø200-350) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 200 | 350 |
| BDKT-LT 2525-K3C (Ø300-500) t max:17 | 25 | 25 | 150 | 26,5 | 17 | 300 | 500 |
| BDKT-LT 2525-K4C (Ø36-48) t max:20 | 25 | 25 | 150 | 26,5 | 20 | 36 | 48 |
| BDKT-LT 2525-K4C (Ø48-70) t max:20 | 25 | 25 | 150 | 26,5 | 20 | 48 | 70 |
| BDKT-LT 2525-K4C (Ø70-110) t max:20 | 25 | 25 | 150 | 26,5 | 20 | 70 | 110 |
| BDKT-LT 2525-K4C (Ø100-150) t max:20 | 25 | 25 | 150 | 26,5 | 20 | 100 | 150 |
| BDKT-LT 2525-K4C (Ø150-200) t max:20 | 25 | 25 | 150 | 26,5 | 20 | 150 | 200 |
| BDKT-LT 2525-K4C (Ø200-350) t max:20 | 25 | 25 | 150 | 26,5 | 20 | 200 | 350 |
| BDKT-LT 2525-K4C (Ø300-500) t max:20 | 25 | 25 | 150 | 26,5 | 20 | 300 | 500 |
Compatible with SANDVIK N151.2...
| Grooving Insert | N151.2 |
| Materials | Steel and Stainless Steel |
| Grooving System | N151.2-System |
| Coating | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| W | b | r | |
| N151.2-300-4E RT300 | 3,0 | 2,5 | 0,25 |
| N151.2-400-4E RT300 | 4,0 | 3,3 | 0,25 |
| Grooving Holder | QF...R/L |
| Application | Axial Grooving |
| Grooving System | Z-System |
| Grooving Insert | Z...D RT250X |
| Packaging Unit | 1 Pc. |
| HxB | L | S | W/ Width |
min-max. Axial-Diameter |
tmax | |
| QFFD 2020R/L 48-66 tmax 10 | 20x20 | 150 | 21 | 3 | 48-66 | 10 |
| QFFD 2020R/L 60-80 tmax 10 | 20x20 | 150 | 21 | 3 | 60-80 | 10 |
| QFFD 2020R/L 74-110 tmax 10 | 20x20 | 150 | 21 | 3 | 74-110 | 10 |
| QFFD 2020R/L 100-150 tmax 10 | 20x20 | 150 | 21 | 3 | 100-150 | 10 |
| QFFD 2525R/L 48-66 tmax 17 | 25x25 | 150 | 26 | 3 | 48-66 | 17 |
| QFFD 2525R/L 60-80 tmax 17 | 25x25 | 150 | 26 | 3 | 60-80 | 17 |
| QFFD 2525R/L 74-110 tmax 17 | 25x25 | 150 | 26 | 3 | 74-110 | 17 |
| QFFD 2525R/L 100-150 tmax 17 | 25x25 | 150 | 26 | 3 | 100-150 | 17 |
| QFGD 2020R/L 52-72 tmax 15 | 20x20 | 150 | 19 | 4 | 52-72 | 15 |
| QFGD 2020R/L 64-100 tmax 15 | 20x20 | 150 | 19 | 4 | 64-100 | 15 |
| QFGD 2020R/L 90-140 tmax 15 | 20x20 | 150 | 19 | 4 | 90-140 | 15 |
| QFGD 2020R/L 130-230 tmax 15 | 20x20 | 150 | 19 | 4 | 130-230 | 15 |
| QFGD 2525R/L 52-72 tmax 22 | 25x25 | 150 | 24 | 4 | 52-72 | 22 |
| QFGD 2525R/L 64-100 tmax 22 | 25x25 | 150 | 24 | 4 | 64-100 | 22 |
| QFGD 2525R/L 90-140 tmax 22 | 25x25 | 150 | 24 | 4 | 90-140 | 22 |
| QFGD 2525R/L 130-230 tmax 22 | 25x25 | 150 | 24 | 4 | 130-230 | 22 |
| QFHD 2525R/L 58-96 tmax 22 | 25x25 | 150 | 23,5 | 5 | 58-96 | 22 |
| QFHD 2525R/L 86-140 tmax 22 | 25x25 | 150 | 23,5 | 5 | 86-140 | 22 |
| QFHD 2525R/L 130-200 tmax 22 | 25x25 | 150 | 23,5 | 5 | 130-200 | 22 |
| QFHD 2525R/L 185-400 tmax 22 | 25x25 | 150 | 23,5 | 5 | 185-400 | 22 |
| Grooving Holder | QF...DR/L 90° cranked |
| Application | Axial Grooving |
| Grooving System | Z-System |
| Grooving Insert | Z...D RT250X |
| Packaging Unit | 1 Pc. |
| HxB | L | S | W/ Width | min-max. Axial-Diameter |
tmax | |
| QFFD-90 2020R/L 48-66 tmax 10 | 20x20 | 150 | 31,5 | 3 | 48-66 | 10 |
| QFFD-90 2020R/L 60-80 tmax 10 | 20x20 | 150 | 31,5 | 3 | 60-80 | 10 |
| QFFD-90 2020R/L 74-110 tmax 10 | 20x20 | 150 | 31,5 | 3 | 74-110 | 10 |
| QFFD-90 2020R/L 100-150 tmax 10 | 20x20 | 150 | 31,5 | 3 | 100-150 | 10 |
| QFGD-90 2020R/L 52-72 tmax 15 | 20x20 | 150 | 36,5 | 4 | 52-72 | 15 |
| QFGD-90 2020R/L 64-100 tmax 15 | 20x20 | 150 | 36,5 | 4 | 64-100 | 15 |
| QFGD-90 2020R/L 90-140 tmax 15 | 20x20 | 150 | 36,5 | 4 | 90-140 | 15 |
| QFGD-90 2020R/L 130-230 tmax 15 | 20x20 | 150 | 36,5 | 4 | 130-230 | 15 |
| QFFD-90 2525R/L 48-66 tmax 17 | 25x25 | 150 | 43,5 | 3 | 48-66 | 17 |
| QFFD-90 2525R/L 60-80 tmax 17 | 25x25 | 150 | 43,5 | 3 | 60-80 | 17 |
| QFFD-90 2525R/L 74-110 tmax 17 | 25x25 | 150 | 43,5 | 3 | 74-110 | 17 |
| QFFD-90 2525R/L 100-150 tmax 17 | 25x25 | 150 | 43,5 | 3 | 100-150 | 17 |
| QFGD-90 2525R/L 52-72 tmax 22 | 25x25 | 150 | 48,5 | 4 | 52-72 | 22 |
| QFGD-90 2525R/L 64-100 tmax 22 | 25x25 | 150 | 48,5 | 4 | 64-100 | 22 |
| QFGD-90 2525R/L 90-140 tmax 22 | 25x25 | 150 | 48,5 | 4 | 90-140 | 22 |
| QFGD-90 2525R/L 130-230 tmax 22 | 25x25 | 150 | 48,5 | 4 | 130-230 | 22 |
| QFHD-90 2525R/L 58-96 tmax 22 | 25x25 | 150 | 48,5 | 5 | 58-96 | 22 |
| QFHD-90 2525R/L 86-140 tmax 22 | 25x25 | 150 | 48,5 | 5 | 86-140 | 22 |
| QFHD-90 2525R/L 130-200 tmax 22 | 25x25 | 150 | 48,5 | 5 | 130-200 | 22 |
| QFHD-90 2525R/L 185-400 tmax 22 | 25x25 | 150 | 48,5 | 5 | 185-400 | 22 |
| Grooving Insert | ZTFD _MM |
| Materials | Steel and Stainless Steel |
| Stechsystem | Z-System |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| r | Lmax | S | Scope of application | |
| ZTFD0303-MM RT250X | 0,3 | 17 | 3 | Steel & Stainless Steel |
| ZTFD0404-MM RT250X | 0,4 | 22 | 4 | Steel & Stainless Steel |
| ZTFD0504-MM RT250X | 0,4 | 22 | 5 | Steel & Stainless Steel |
| Grooving Insert | ZRED.. -EG |
| Materials | Steel and Stainless Steel |
| Stechsystem | Z-System |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| L | S | f | Scope of application | |
| ZRED03-EG RT250X | 17 | 3 | 0,04-0,14 | Steel & Stainless Steel |
| ZRED04-EG RT250X | 21 | 4 | 0,07-0,2 | Steel & Stainless Steel |
| ZRED05-EG RT250X | 20 | 5 | 0,1-0,24 | Steel & Stainless Steel |
| ZRED06-EG RT250X | 19 | 6 | 0,12-0,29 | Steel & Stainless Steel |
| Grooving Insert | ZPED...-MG |
| Materials | Steel and Stainless Steel |
| Stechsystem | Z-System |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| r | L max | S | Scope of application | |
| ZPED02502-MG RT250X | 0,2 | 17 | 2,5 | Steel & Stainless Steel |
| ZPED0302-MG RT250X | 0,2 | 17 | 3 | Steel & Stainless Steel |
| ZPED0402-MG RT250X | 0,2 | 22 | 4 | Steel & Stainless Steel |
English
Deutsch
