We ship free of charge from 150€
Tel.: +49 (0)208 - 848 67 82
There are 19 products.
| Grooving Insert | MGGN |
| Materials | Hard Materials |
| Coating | RTC20=CBN fine grain grade for grooving in hardened steel, also in interrupted cut |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 1 Pc. |
| B | R | L | S | Scope of application | |
| MGGN 200-CBN RTC20 | 2 | 0,2 | 16 | 4,8 | Hard Materials |
| MGGN 300-CBN RTC20 | 3 | 0,4 | 21 | 4,8 | Hard Materials |
| Grooving Insert | MGMN |
| Materials | Steel and Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving & grooving with excellent chip control
| B | R | L | S | Scope of application | |
| MGMN 300-GT RT300 | 3 | 0,4 | 21 | 4,8 | Steel and Stainless Steel |
| MGMN 400-GT RT300 | 4 | 0,4 | 21 | 4,8 | Steel and Stainless Steel |
| Grooving Insert | MGMN |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving, for universal use
| B | R | L | S | Scope of application | |
| MGMN 200-M RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & STAINLESS STEEL |
| MGMN 300-M RT300 | 3 | 0,4 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 400-M RT300 | 4 | 0,4 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 500-M RT300 | 5 | 0,8 | 26 | 5,8 | STEEL & STAINLESS STEEL |
| Grooving Insert | MRMN... |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving, for universal use
| B | R | L | S | |
| MRMN 200-M RT300 | 2 | 1 | 16 | 3,5 |
| MRMN 300-M RT300 | 3 | 1,5 | 21 | 4,8 |
| MRMN 400-M RT300 | 4 | 2 | 21 | 4,8 |
| MRMN 500-M RT300 | 5 | 2,5 | 25,85 | 5,8 |
| Grooving Insert | MGMN |
| Materials | Steel/Cast Iron |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Stable cutting edge, grooving even with interrupted cuts
| B | R | L | S | Scope of application | |
| MGMN 200-C RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & CAST IRON |
| MGMN 300-C RT300 | 3 | 0,4 | 21 | 4,9 | STEEL & CAST IRON |
| MGMN 400-C RT300 | 4 | 0,4 | 21 | 4,9 | STEEL & CAST IRON |
| MGMN 500-C RT300 | 5 | 0,4 | 26 | 5,8 | STEEL & CAST IRON |
| Grooving Insert | MGMN... |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Soft-cutting geometry, grooving and parting off
| B | R | L | S | Scope of application | |
| MGMN 200-J RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & STAINLESS STEEL |
| MGMN 300-J RT300 | 3 | 0,2 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 400-J RT300 | 4 | 0,3 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 500-J RT300 | 5 | 0,3 | 26 | 4,8 | STEEL & STAINLESS STEEL |
| Grooving Insert | MGMR |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Soft-cutting geometry, grooving and parting off
| B | R | L | S | Scope of application | |
| MGMR 200-J 6D RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & STAINLESS STEEL |
| MGMR 300-J 6D RT300 | 3 | 0,2 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| Grooving Insert | MGMN |
| Materials | NF-Materials |
| Coating | RT100 = Uncoated K10-K15 carbide for ALU and plastics |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Ground, sharp cutting edge with large rake angle
| B | R | L | S | Cutting Data | |
| MGMN 200-AL RT100 | 2 | 0,2 | 16 | 3,5 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| MGMN 300-AL RT100 | 3 | 0,4 | 21 | 4,8 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| MGMN 400-AL RT100 | 4 | 0,4 | 21 | 4,8 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| MGMN 500-AL RT100 | 5 | 0,8 | 26 | 5,8 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| Grooving Holder | BIKTR/L |
| Application | Inside Grooving |
| Grooving System | MGM./MRM.-System |
| Grooving Insert | MGMN/MGMR/MRMN... |
| Packaging Unit | 1 Pc. |
BIKT....K2C = Grooving Width 2mm BIKT....K3C = Grooving Width 3mm BIKT....K4C = Grooving Width 4mm
| d | D | L | l | h | f | t max | Dmin | |
| BIKTR/L 16-K2C Grooving Width 2mm | 16 | 20 | 150 | 33 | 15 | 11,5 | 4 | 20 |
| BIKTR/L 20-K2C Grooving Width 2mm | 20 | 26 | 170 | 33 | 18 | 14,5 | 6 | 26 |
| BIKTR/L 20-K3C Grooving Width 3mm | 20 | 26 | 170 | 33 | 18 | 15 | 6 | 26 |
| BIKTR/L 25-K3C Grooving Width 3mm | 25 | 32 | 200 | 45 | 23 | 18,5 | 7 | 32 |
| BIKTR/L 32-K3C Grooving Width 3mm | 32 | 40 | 250 | 49 | 30 | 22 | 8 | 40 |
| BIKTR/L 25-K4C Grooving Width 4mm | 25 | 32 | 200 | 45 | 23 | 18,5 | 7 | 32 |
| BIKTR/L 32-K4C Grooving Width 4mm | 32 | 40 | 250 | 49 | 30 | 22 | 8 | 40 |
| Grooving Holder | BIRTR/L |
| Application | Inside Grooving |
| Grooving System | MGM./MRM.-System |
| Grooving Insert | MRMN... |
| Packaging Unit | 1 Pc. |
| d | D | L | l | h | f | t max | |
| BIRTR 25-KR-3C Grooving Width 3mm | 25 | 28,5 | 200 | 42 | 23 | 16 | 3,5 |
| BIRTL 25-KR-3C Grooving Width 3mm | 25 | 28,5 | 200 | 42 | 23 | 16 | 3,5 |
| BIRTR 32-KR-3C Grooving Width 3mm | 32 | 35,5 | 250 | 49 | 30 | 19,5 | 3,5 |
| BIRTL 32-KR-3C Grooving Width 3mm | 32 | 35,5 | 250 | 49 | 30 | 19,5 | 3,5 |
| Grooving Insert | DGN 3102... RT300 |
| Materials | Steel |
| Stechsystem | DGN-System |
| Coating | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| d | L | s | r | a° | Scope of application | |
| DGN 3102-C RT300 | 3,10 | 20,00 | 5,70 | 0,20 | 10 | STEEL |
| Grooving Holder | BIKTR/L |
| Application | Inside Grooving |
| Grooving System | DGN-System |
| Grooving Insert | DGN 3102... RT300 |
| Packaging Unit | 1 Pc. |
| d | D | L | l | h | f | t max | |
| BIKTR/L 20-ID3C Grooving Width 3mm | 20 | 26 | 170 | 32 | 18 | 15 | 6 |
| BIKTR/L 25-ID3C Grooving Width 3mm | 25 | 32 | 200 | 42 | 23 | 18 | 7 |
Compatible with SANDVIK N151.2...
| Grooving Insert | N151.2 |
| Materials | Steel and Stainless Steel |
| Grooving System | N151.2-System |
| Coating | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| W | b | r | |
| N151.2-300-4E RT300 | 3,0 | 2,5 | 0,25 |
| N151.2-400-4E RT300 | 4,0 | 3,3 | 0,25 |
| Grooving Insert | RT16R/L RT305 |
| Materials | Steel and Stainless Steel |
| Stechsystem | RT16-System |
| Coating | RT305 = PVD grade M20-M30 for stainless steel with the most modern coating |
| Packaging unit | 5 Pc. |
| W±0,025 | r | La max | øI.C | S | |
| 075-R01 | 0,75 | 0,1 | 2 | 9,525 | 3,18 |
| 095-R01 | 0,95 | 0,1 | 2 | 9,525 | 3,18 |
| 100-R01 | 1,0 | 0,1 | 2 | 9,525 | 3,18 |
| 110-R01 | 1,1 | 0,1 | 2 | 9,525 | 3,18 |
| 120-R01 | 1,2 | 0,1 | 2 | 9,525 | 3,18 |
| 125-R02 | 1,25 | 0,2 | 2 | 9,525 | 3,18 |
| 130-R02 | 1,3 | 0,2 | 2 | 9,525 | 3,18 |
| 150-R02 | 1,5 | 0,2 | 2 | 9,525 | 3,18 |
| 160-R02 | 1,6 | 0,2 | 2 | 9,525 | 3,18 |
| 165-R02 | 1,65 | 0,2 | 2 | 9,525 | 3,18 |
| 185-R02 | 1,85 | 0,2 | 2,5 | 9,525 | 3,18 |
| 200-R02 | 2,0 | 0,2 | 2,5 | 9,525 | 3,18 |
| 220-R02 | 2,2 | 0,2 | 2,5 | 9,525 | 3,18 |
| 250-R02 | 2,5 | 0,2 | 2,5 | 9,525 | 3,18 |
| 300-R02 | 3,0 | 0,2 | 3 | 9,525 | 3,18 |
| Grooving Holder | S20M-QC...R/L25 |
| Application | Inside Grooving |
| Grooving System | RT16-System |
| Grooving Insert | RT16R/L... RT305 |
| Packaging Unit | 1 Pc. |
ATTENTION: Right boring bar = left grooving inserts - left boring bar = right grooving inserts
| ØDmin | Ød | L | S | e | For groove width | |
| S20M-QC1615R/L25 | 26 | 20 | 150 | 12,5 | 15 | 0,5-1,80mm |
| S20M-QC1625R/L25 | 26 | 20 | 150 | 12,5 | 15 | 1,8-3,0mm |
| Grooving Holder | C...-Q.DR/L tmax4 |
| Application | Inside Grooving |
| Grooving System | Z-System |
| Grooving Insert | Z...D RT250X |
| Packaging Unit | 1 Pc. |
| ØDmin | Ød | L | S | W/Width | ar max | |
| C20Q-QEDR/L -2,5 tmax 5 | 27 | 20 | 180 | 15,2 | 2,5 | 5 |
| C20Q-QFDR/L -3 tmax 5 | 27 | 20 | 0 | 15,2 | 3 | 5 |
| C25R-QEDR/L -2,5 tmax 7 | 33 | 25 | 200 | 20,3 | 2,5 | 7 |
| C25R-QFDR/L -3 tmax 7 | 27 | 20 | 0 | 15,2 | 3 | 5 |
| C25R-QGDR/L -4 tmax 8 | 35 | 25 | 200 | 21,5 | 4 | 8 |
| C25R-QHDR/L -5 tmax 8 | 35 | 25 | 200 | 21,5 | 5 | 8 |
| C25R-QKDR/L -6 tmax 8 | 35 | 25 | 200 | 21,5 | 6 | 8 |
| C32S-QEDR/L -2,5 tmax 9 | 42 | 32 | 250 | 25,3 | 2,5 | 9 |
| C32S-QFDR/L -3 tmax 9 | 42 | 32 | 250 | 25,3 | 3 | 9 |
| C32S-QGDR/L -4 tmax 11 | 44 | 32 | 250 | 27,5 | 4 | 11 |
| C32S-QHDR/L -5 tmax 11 | 44 | 32 | 250 | 27,5 | 5 | 11 |
| C32S-QKDR/L -6 tmax 11 | 44 | 32 | 250 | 27,5 | 6 | 11 |
| C40T-QGDR/L -4 tmax 13 | 5 | 40 | 300 | 33,5 | 4 | 13 |
| C40T-QHDR/L -5 tmax 13 | 54 | 40 | 300 | 33,5 | 5 | 13 |
| C40T-QKDR/L -6 tmax 13 | 54 | 40 | 300 | 33,5 | 6 | 13 |
| Grooving Insert | ZTFD _MM |
| Materials | Steel and Stainless Steel |
| Stechsystem | Z-System |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| r | Lmax | S | Scope of application | |
| ZTFD0303-MM RT250X | 0,3 | 17 | 3 | Steel & Stainless Steel |
| ZTFD0404-MM RT250X | 0,4 | 22 | 4 | Steel & Stainless Steel |
| ZTFD0504-MM RT250X | 0,4 | 22 | 5 | Steel & Stainless Steel |
| Grooving Insert | ZRED.. -EG |
| Materials | Steel and Stainless Steel |
| Stechsystem | Z-System |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| L | S | f | Scope of application | |
| ZRED03-EG RT250X | 17 | 3 | 0,04-0,14 | Steel & Stainless Steel |
| ZRED04-EG RT250X | 21 | 4 | 0,07-0,2 | Steel & Stainless Steel |
| ZRED05-EG RT250X | 20 | 5 | 0,1-0,24 | Steel & Stainless Steel |
| ZRED06-EG RT250X | 19 | 6 | 0,12-0,29 | Steel & Stainless Steel |
| Grooving Insert | ZPED...-MG |
| Materials | Steel and Stainless Steel |
| Stechsystem | Z-System |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| r | L max | S | Scope of application | |
| ZPED02502-MG RT250X | 0,2 | 17 | 2,5 | Steel & Stainless Steel |
| ZPED0302-MG RT250X | 0,2 | 17 | 3 | Steel & Stainless Steel |
| ZPED0402-MG RT250X | 0,2 | 22 | 4 | Steel & Stainless Steel |
English
Deutsch
