We ship free of charge from 150€
Tel.: +49 (0)208 - 848 67 82
There are 26 products.
| Tool Type | ZA-System Blade |
| Application | Parting |
| Grooving System | ZA-System |
| Insert | ZA |
| Packaging unit | 1 Pc. |
| H | H1 | A | Grooving Width | L | |
| SML 26-ZT-3C | 26 | 21,4 | 1,6 | 3 | 110 |
| SML 32-ZT-3C | 32 | 25 | 2,4 | 3 | 150 |
| Grooving Insert | ZA |
| Materials | Steel/Stainless Steel |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Grooving system | ZA-System |
| Packaging unit | 10 Pc. |
| L | R | S | |
| ZA 0302-J RT250X | 19,9 | 0,2 | 3 |
| ZA 0302-J-6L RT250X | 19,9 | 0,2 | 3 |
| ZA 0302-J-6R RT250X | 19,9 | 0,2 | 3 |
| Grooving Insert | ZTFD _MM |
| Materials | Steel and Stainless Steel |
| Stechsystem | Z-System |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| r | Lmax | S | Scope of application | |
| ZTFD0303-MM RT250X | 0,3 | 17 | 3 | Steel & Stainless Steel |
| ZTFD0404-MM RT250X | 0,4 | 22 | 4 | Steel & Stainless Steel |
| ZTFD0504-MM RT250X | 0,4 | 22 | 5 | Steel & Stainless Steel |
| Grooving Insert | ZPED...-MG |
| Materials | Steel and Stainless Steel |
| Stechsystem | Z-System |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| r | L max | S | Scope of application | |
| ZPED02502-MG RT250X | 0,2 | 17 | 2,5 | Steel & Stainless Steel |
| ZPED0302-MG RT250X | 0,2 | 17 | 3 | Steel & Stainless Steel |
| ZPED0402-MG RT250X | 0,2 | 22 | 4 | Steel & Stainless Steel |
| Grooving Insert | ZRED.. -EG |
| Materials | Steel and Stainless Steel |
| Stechsystem | Z-System |
| Coating | RT250X = PVD multilayer coated P10-P30 and M10-M30 carbide for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| L | S | f | Scope of application | |
| ZRED03-EG RT250X | 17 | 3 | 0,04-0,14 | Steel & Stainless Steel |
| ZRED04-EG RT250X | 21 | 4 | 0,07-0,2 | Steel & Stainless Steel |
| ZRED05-EG RT250X | 20 | 5 | 0,1-0,24 | Steel & Stainless Steel |
| ZRED06-EG RT250X | 19 | 6 | 0,12-0,29 | Steel & Stainless Steel |
| Grooving Insert | MGGN |
| Materials | Hard Materials |
| Coating | RTC20=CBN fine grain grade for grooving in hardened steel, also in interrupted cut |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 1 Pc. |
| B | R | L | S | Scope of application | |
| MGGN 200-CBN RTC20 | 2 | 0,2 | 16 | 4,8 | Hard Materials |
| MGGN 300-CBN RTC20 | 3 | 0,4 | 21 | 4,8 | Hard Materials |
| Grooving Insert | MGMN |
| Materials | Steel and Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving & grooving with excellent chip control
| B | R | L | S | Scope of application | |
| MGMN 300-GT RT300 | 3 | 0,4 | 21 | 4,8 | Steel and Stainless Steel |
| MGMN 400-GT RT300 | 4 | 0,4 | 21 | 4,8 | Steel and Stainless Steel |
| Grooving Insert | MGMN |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving, for universal use
| B | R | L | S | Scope of application | |
| MGMN 200-M RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & STAINLESS STEEL |
| MGMN 300-M RT300 | 3 | 0,4 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 400-M RT300 | 4 | 0,4 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 500-M RT300 | 5 | 0,8 | 26 | 5,8 | STEEL & STAINLESS STEEL |
| Grooving Insert | MRMN... |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Grooving, for universal use
| B | R | L | S | |
| MRMN 200-M RT300 | 2 | 1 | 16 | 3,5 |
| MRMN 300-M RT300 | 3 | 1,5 | 21 | 4,8 |
| MRMN 400-M RT300 | 4 | 2 | 21 | 4,8 |
| MRMN 500-M RT300 | 5 | 2,5 | 25,85 | 5,8 |
| Grooving Insert | MGMN |
| Materials | Steel/Cast Iron |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Stable cutting edge, grooving even with interrupted cuts
| B | R | L | S | Scope of application | |
| MGMN 200-C RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & CAST IRON |
| MGMN 300-C RT300 | 3 | 0,4 | 21 | 4,9 | STEEL & CAST IRON |
| MGMN 400-C RT300 | 4 | 0,4 | 21 | 4,9 | STEEL & CAST IRON |
| MGMN 500-C RT300 | 5 | 0,4 | 26 | 5,8 | STEEL & CAST IRON |
| Grooving Insert | MGMN... |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Soft-cutting geometry, grooving and parting off
| B | R | L | S | Scope of application | |
| MGMN 200-J RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & STAINLESS STEEL |
| MGMN 300-J RT300 | 3 | 0,2 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 400-J RT300 | 4 | 0,3 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| MGMN 500-J RT300 | 5 | 0,3 | 26 | 4,8 | STEEL & STAINLESS STEEL |
| Grooving Insert | MGMR |
| Materials | Steel/Stainless Steel |
| Coating | RT300 = PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Soft-cutting geometry, grooving and parting off
| B | R | L | S | Scope of application | |
| MGMR 200-J 6D RT300 | 2 | 0,2 | 16 | 3,5 | STEEL & STAINLESS STEEL |
| MGMR 300-J 6D RT300 | 3 | 0,2 | 21 | 4,8 | STEEL & STAINLESS STEEL |
| Grooving Insert | MGMN |
| Materials | NF-Materials |
| Coating | RT100 = Uncoated K10-K15 carbide for ALU and plastics |
| Grooving system | MGM./MRM.-System |
| Packaging unit | 10 Pc. |
Ground, sharp cutting edge with large rake angle
| B | R | L | S | Cutting Data | |
| MGMN 200-AL RT100 | 2 | 0,2 | 16 | 3,5 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| MGMN 300-AL RT100 | 3 | 0,4 | 21 | 4,8 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| MGMN 400-AL RT100 | 4 | 0,4 | 21 | 4,8 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| MGMN 500-AL RT100 | 5 | 0,8 | 26 | 5,8 | Vc= 160-300m/min f=0,04-0,1 mm/U |
| Grooving Insert | DGN 3102... RT300 |
| Materials | Steel |
| Stechsystem | DGN-System |
| Coating | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| d | L | s | r | a° | Scope of application | |
| DGN 3102-C RT300 | 3,10 | 20,00 | 5,70 | 0,20 | 10 | STEEL |
| Grooving Holder | BDKTR/L |
| Application | Outside Grooving |
| Grooving System | DGN-System |
| Grooving Insert | DGN 3102... RT300 |
| Packaging Unit | 1 Pc. |
| h | W | L | S | T(max) | D(max) | |
| 1616-ID3C (DGN 3mm) |
16 | 16 | 125 | 16,4 | 18 | 40 |
| 2020-ID3C (DGN 3mm) |
20 | 20 | 125 | 20,4 | 20 | 44 |
| 2525-ID3C (DGN 3mm) |
25 | 25 | 150 | 25,3 | 22 | 50 |
| Grooving Insert | GTN...RT300 |
| Materials | Steel and Stainless Steel |
| Stechsystem | GTN-System |
| Coating | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| W | r | |
| GTN-2 RT300 | 2,20 | 0,20 |
| GTN-3 RT300 | 3,10 | 0,20 |
| GTN-4 RT300 | 4,10 | 0,20 |
| Grooving Insert | GTN...RT100 |
| Materials | NF-Materials |
| Stechsystem | GTN-System |
| Coating | RT100: Uncoated K10-K15 carbide for ALU and plastics |
| Packaging unit | 10 Pc. |
| W | r | |
| GTN-2 RT100 | 2,20 | 0,20 |
| GTN-3 RT100 | 3,10 | 0,20 |
| GTN-4 RT100 | 4,10 | 0,20 |
| Grooving Holder | GTN Blade |
| Application | Parting |
| Grooving System | GTN-System |
| Grooving Insert | GTN RT300/RT100 |
| Packaging Unit | 1 Pc. |
| H | W | L | h | |
| GTN Blade 26-2 | 26 | 1,6 | 110 | 21 |
| GTN Blade 32-2 | 32 | 1,6 | 150 | 25 |
| GTN Blade 26-3 | 26 | 2,4 | 110 | 21 |
| GTN Blade 32-3 | 32 | 2,4 | 150 | 25 |
| GTN Blade 32-4 | 32 | 3,2 | 150 | 25 |
| Tool | Tool Block for Blade |
| Application | Parting |
| Parting System | GTN-System, Z-System |
| Packaging Unit | 1 Pc. |
| H | H1 | H2 | H3 | H4 | W1 | W2 | B | L | |
| 20-26 (26mm Blades) | 20 | 43 | 9 | 26 | 21,4 | 4 | 38 | 19 | 86 |
| 25-26 (26mm Blades) | 25 | 45 | 5 | 26 | 21,4 | 4 | 42 | 23 | 110 |
| 20-32 (32mm Blades) | 20 | 50 | 13 | 32 | 25 | 5,3 | 38 | 19 | 100 |
| 25-32 (32mm Blades) | 25 | 50 | 8 | 32 | 25 | 5,3 | 42 | 23 | 110 |
| 32-32 (32mm Blades) | 32 | 54 | 5 | 32 | 25 | 5,3 | 38 | 29 | 110 |
Compatible with SANDVIK N151.2...
| Grooving Insert | N151.2 |
| Materials | Steel and Stainless Steel |
| Grooving System | N151.2-System |
| Coating | RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel |
| Packaging unit | 10 Pc. |
| W | b | r | |
| N151.2-300-4E RT300 | 3,0 | 2,5 | 0,25 |
| N151.2-400-4E RT300 | 4,0 | 3,3 | 0,25 |
English
Deutsch
