SPECIAL OFFER

-€39.00
New

Set 1x MK45 SNEG12 + 10/20x SNEG Milling Inserts

€188.00 ab €149.00 -€39.00

Availability: 2147483645 In Stock

Set consisting of:

1x MK45 SNEG12

10/20x Milling Inserts SNEG

Face Mill-Set of your Choice:

	D	d	L	ap max	Z
MK45 SNEG12 D050 A22 Z05-H + 10 Inserts	50	22	40	7	5
MK45 SNEG12 D063 A22 Z06-H + 10 Inserts	63	22	40	7	6
MK45 SNEG12 D080 A27 Z07-H + 10 Inserts	80	27	50	7	7
MK45 SNEG12 D100 A32 Z09-H + 10 Inserts	100	32	50	7	9
MK45 SNEG12 D125 B40 Z11 + 20 Inserts	125	40	63	7	11

Mill Inserts of your Choice:

	L	I.C	S	d	r	Scope of application
SNEG 1205-GM RT305	7,6	12	4,76	4,6	0,8	Steel/Stainless Steel/ Specials Materials

RT305 = PVD grade M20-M30 for stainless steel with the most modern coating

Packaging unit= 1 Pc.

-€16.00

Rinaldi-Tools

SPECIAL OFFER! GTN-Blade + 10 Grooving Inserts...

€75.00 ab €59.00 -€16.00

Availability: 2147483619 In Stock

GTN-Blade + 10 GTN... RT300 Grooving Insert

Blades:

Blade:	GTN Blade
Grooving System	GTN-System
Packaging unit	1 Pc.

	Grooving Width	H	W	L	h
GTN Blade 26-2	2 mm	26	1,6	110	21
GTN Blade 32-2	2 mm	32	1,6	150	25
GTN Blade 26-3	3 mm	26	2,4	110	21
GTN Blade 32-3	3 mm	32	2,4	150	25
GTN Blade 32-4	4 mm	32	3,2	150	25

Grooving Insert:

Grooving Insert	GTN...RT300
Materials	Steel and Stainless Steel
Grooving system	GTN-System
Coating	RT300: PVD-coated P15-P25 and M10-M25 for universal use in steel and stainless steel
Packaging unit	10 Pc.

	Grooving Width	W	r
GTN-2 RT300	2 mm	2,20	0,20
GTN-3 RT300	3 mm	3,10	0,20
GTN-4 RT300	4 mm	4,10	0,20

-€9.50

Rinaldi-Tools

Solid Carbide HPC Mill Set 6 - 12 mm

€88.50 ab €79.00 -€9.50

Availability: 2147483623 In Stock

Mill Typ	Solid Carbide End mill Set
Spiral Angle	35°/38°
Material	Steel, Stainless Steel, Cast Iron
Processing	Roughing and Finish
Length	Standard Lenght
Shaft	Weldon Shaft
Teeth	4
Coating	RT405: PVD-TiAlN-coated high-performance grade for solid carbide milling cutters
Packaging unit	1 Pc

Eckfräsen

- 4 flute solid carbide cutter
- Cutting across the middle
- TiAlN-coated
- Roughing/finishing
- consisting of respectively 1x 6/8/10/12 mm
- Unevenly divided spiral for roughing, finishing and neck relief (M)

	d(h6)	d1	H	M	L	Z
6	6	5,7	13	21	57	4
8	8	7,7	19	27	63	4
10	10	9,5	22	32	72	4
12	12	11,5	26	38	83	4

-20%

Rinaldi-Tools

Solid Carbide End Mill with Extra long cutting...

€17.50 ab €14.00 -20%

Availability: 2147483633 In Stock

Mill Typ	Solid Carbide End mill
Spiral Angle	30°
Material	Steel, Stainless Steel, Cast Iron
Processing	Finish
Lenght	Extra long cutting Edge
Shaft	Cylindrical Shaft
Teeth	4
Coating	RT405: PVD-TIALN-coated high-performance grade for solid carbide milling cutters
Packaging unit	1 Pc

Eckfräsen

- 4 flute solid carbide cutter
- cutting across the middle
- TIALN-coated

	D	d	H	L	Z	Shank Type
SFX-Z4-D3.0 RT405	3	6	20	75	4	A
SFX-Z4-D4.0 RT405	4	6	25	75	4	A
SFX-Z4-D5.0 RT405	5	6	30	75	4	A
SFX-Z4-D6.0 RT405	6	6	30	75	4	B
SFX-Z4-D8.0 RT405	8	8	40	100	4	B
SFX-Z4-D10.0 RT405	10	10	50	110	4	B
SFX-Z4-D12.0 RT405	12	12	50	110	4	B
SFX-Z4-D16.0 RT405	16	16	70	150	4	B
SFX-Z4-D20.0 RT405	20	20	75	150	4	B

-20%

Rinaldi-Tools

Solid Carbide Hard Milling Cutters 68 HRC

€15.00 ab €12.00 -20%

Availability: 2147483643 In Stock

Mill Typ	Solid Carbide Hard Milling Cutters 68 HRC
Spiral Angle	45°
Material	Hard Materials
Lenght	Standard Lenght
Shaft	Cylindrical Shank
Teeth	4
Coating	RT555: PVD-coated carbide substrate for the Hard machining of steel (up to HRC 55-68). Highest wear resistance and toughness
Packaging unit	1 Pc.

Eckfräsen

- 4-flute solid carbide cutter
- cutting across the middle
- PVD-coated

	D	d(h6)	H	L	Z	Geometry
HF-Z4-D1.0 RT555	1	6	3	50	4	A
HF-Z4-D2.0 RT555	2	6	6	50	4	A
HF-Z4-D3.0 RT555	3	6	8	50	4	A
HF-Z4-D4.0 RT555	4	6	11	50	4	A
HF-Z4-D5.0 RT555	5	6	13	50	4	A
HF-Z4-D5.5 RT555	5,5	6	16	50	4	A
HF-Z4-D6.0 RT555	6	6	16	50	4	B
HF-Z4-D8.0 RT555	8	8	20	60	4	B
HF-Z4-D10.0 RT555	10	10	25	75	4	B
HF-Z4-D12.0 RT555	12	12	30	75	4	B
HF-Z4-D14.0 RT555	14	14	32	75	4	B
HF-Z4-D16.0 RT555	16	16	45	100	4	B
HF-Z4-D18.0 RT555	18	18	45	100	4	B
HF-Z4-D20.0 RT555	20	20	45	100	4	B

-20%

Rinaldi-Tools

Solid Carbide Hard Milling Cutters 68 HRC Long...

€19.90 ab €15.92 -20%

Availability: 2147483647 In Stock

Mill Typ	Solid Carbide Hard Milling Cutters 68 HRC Long Version
Spiral Angle	45°
Material	Hard Materials
Lenght	Long Version
Shaft	Cylindrical Shank
Teeth	4
Coating	RT555: PVD-coated carbide substrate for the Hard machining of steel (up to HRC 55-68). Highest wear resistance and toughness
Packaging unit	1 Pc.

Eckfräsen

- 4-flute solid carbide cutter
- cutting across the middle
- PVD-coated

	D	d(h6)	H	L	Z	Geometry
HFL-Z4-D3.0 RT555	3	6	12	75	4	A
HFL-Z4-D4.0 RT555	4	6	15	75	4	A
HFL-Z4-D5.0 RT555	5	6	20	75	4	A
HFL-Z4-D6.0 RT555	6	6	20	75	4	B
HFL-Z4-D8.0 RT555	8	8	25	100	4	B
HFL-Z4-D10.0 RT555	10	10	30	100	4	B
HFL-Z4-D12.0 RT555	12	12	35	100	4	B
HFL-Z4-D14.0 RT555	14	14	40	100	4	B
HFL-Z4-D16.0 RT555	16	16	50	150	4	B
HFL-Z4-D20.0 RT555	20	20	55	150	4	B

-20%

Rinaldi-Tools

Solid Carbide Ball Nosed Hard Cutter until 68 HRC

€27.50 ab €22.00 -20%

Availability: 2147483639 In Stock

Mill Typ	Solid Carbide Ball Nosed Hard Cutter until 68 HRC
Spiral Angle	35°
Material	Hard Materials
Lenght	Standard Lenght
Shaft	Cylindrical Shank
Teeth	2
Coating	RT555: PVD-coated carbide substrate for the Hard machining of steel (up to HRC 55-68). Highest wear resistance and toughness
Packaging unit	1 Pc.

Eckfräsen

- 2-flute solid carbide cutter
- cutting across the middle
- PVD-coated

	r	D	d(h6)	H	L	Z	Geometry
D1.0	0,5	1	6	2	50	2	A
D1.5	0,75	1,5	6	3	50	2	A
D2.0	1	2	6	4	50	2	A
D2.5	1,25	2,5	6	5	50	2	A
D3.0	1,5	3	6	6	50	2	A
D3.5	1,75	3,5	6	8	50	2	A
D4.0	2	4,0	6	8	50	2	A
D5.0	2,5	5,0	6	10	50	2	A
D5.5	2,75	5,5	6	12	50	2	A
D6.0	3	6	6	12	50	2	B
D8.0	4	8	8	16	60	2	B
D10.0	5	10	10	20	75	2	B
D12.0	6	12	12	24	75	2	B
D14.0	7	14	14	28	75	2	B
D16.0	8	16	16	32	100	2	B
D20.0	10	20	20	40	100	2	B

-20%

Rinaldi-Tools

Solid Carbide Ball Nosed Hard Cutter until 68...

€32.00 ab €25.60 -20%

Availability: 2147483647 In Stock

Mill Typ	Solid Carbide Ball Nosed Hard Cutter until 68 HRC Long Version
Spiral Angle	35°
Material	Hard Materials
Lenght	Lang Version
Shaft	Cylindrical Shank
Teeth	2
Coating	RT555: PVD-coated carbide substrate for the Hard machining of steel (up to HRC 55-68). Highest wear resistance and toughness
Packaging unit	1 Pc.

Eckfräsen

- 2-flute solid carbide cutter
- cutting across the middle
- PVD-coated

	r	D	d(h6)	H	L	Z	Geometry
HKFL-Z2-D2.0 RT555	1	2	6	4	75	2	A
HKFL-Z2-D2.5 RT555	1,25	2,5	6	6	75	2	A
HKFL-Z2-D3.0 RT555	1,5	3	6	6	75	2	A
HKFL-Z2-D3.5 RT555	1,75	3,5	6	8	75	2	A
HKFL-Z2-D4.0 RT555	2	4,0	6	8	75	2	A
HKFL-Z2-D5.0 RT555	2,5	5,0	6	10	75	2	A
HKFL-Z2-D5.5 RT555	2,75	5,5	6	12	75	2	A
HKFL-Z2-D6.0 RT555	3	6	6	12	75	2	B
HKFL-Z2-D8.0 RT555	4	8	8	16	100	2	B
HKFL-Z2-D10.0 RT555	5	10	10	20	100	2	B
HKFL-Z2-D12.0 RT555	6	12	12	24	100	2	B
HKFL-Z2-D14.0 RT555	7	14	14	28	100	2	B
HKFL-Z2-D16.0 RT555	8	16	16	32	150	2	B
HKFL-Z2-D20.0 RT555	10	20	20	40	150	2	B

NEW

Rinaldi-Tools

Solid Carbide short step drill

ab €25.50

Availability: 2147483641 In Stock

Tool	Solid Carbide short step drill
Material	Steel, Stainless Steel, Cast Iron
Usable Lenght	3xD
Shank	Cylindrical Shank
Packaging unit	1 Pc

	D(m8)	d(h6)	D2(m7)	L	L2	L3	L1
VSB-M4-3xD-Z	3,3	6	4,5	66	28	36	11,4
VSB-M5-3xD-Z	4,2	6	6	66	28	36	13,6
VSB-M6-3xD-Z	5	8	7	79	41	36	16,5
VSB-M8-3xD-Z	6,75	10	9,5	89	47	40	21
VSB-M8x1,0-3xD-Z	7	10	9,8	89	47	40	21
VSB-M10-3xD-Z	8,5	12	12	102	55	45	25,5
VSB-M10x1,0-3xD-Z	9	12	12	102	55	45	25,5
VSB-M12-3xD-Z	10,25	14	14	107	60	45	30
VSB-M14-3xD-Z	12	16	16	115	65	48	34,5
VSB-M16-3xD-Z	14	18	18	123	73	48	38,5

SMOXH

External Grooving Holder - BDKTR/L - MGMN t max:40

ab €89.00

Availability: 2147483639 In Stock

Grooving Holder	BDKTR/L t max:40
Application	Outside Grooving
Grooving System	MGM./MRM.-System
Grooving Insert	MGMN/MGMR/MRMN...
Packaging Unit	1 Pc.

	h=H	B	L	f	t max	d max
BDKTR 2525-K3C t max:40 for MG../MR 300 (3mm)	25	25	170	25,4	40	84
BDKTL 2525-K3C t max:40 for MG../MR 300 (3mm)	25	25	170	25,4	40	84
BDKTR 2525-K4C t max:40 for MG../MR 400 (4mm)	25	25	170	25,4	40	84
BDKTL 2525-K4C t max:40 for MG../MR 400 (4mm)	25	25	170	25,4	40	84

Torque-Screwdriver Kit TORX®

ab €129.00

Availability: 2147483644 In Stock

Torque-Screwdriver Kit TORX-PLUS®

ab €139.00

Availability: 2147483645 In Stock

External Tool Holder - SRHCR/L

ab €62.00

Availability: 2147483647 In Stock

External Tool Holder	SRHCR/L
Insert	RC.
Main application	Longitudinal turning
Clamping	Screw Clamp
Packaging unit	1 Pc.

	h=H	B	L	f	Insert
SRHCR 2020 K10	20	20	120	20	RCG./RCM. 10..
SRHCL 2020 K10	20	20	120	20	RCG./RCM. 10..
SRHCR 2525 K10	25	25	120	25	RCG./RCM. 10..
SRHCL 2525 K10	25	25	120	25	RCG./RCM. 10..
SRHCR 2020 K12	20	20	120	20	RCG./RCM. 12..
SRHCL 2020 K12	20	20	120	20	RCG./RCM. 12..
SRHCR 2525 K12	25	25	120	25	RCG./RCM. 12..
SRHCL 2525 K12	25	25	120	25	RCG./RCM. 12..

Rinaldi-Tools

Indexable insert - CNMG...-SF RTC+

ab €3.70

Availability: 2147483647 In Stock

Shape	CNMG
Processing	Finish
Workpiece Material	Steel and Stainless Steel
Grade	RTC+: PVD coated P05-P15 Cermet grade for finishing of steel and stainless steel
Packaging unit	10 Pc.

	r	L	I.C.	S	Scope of application
CNMG 090304-SF RTC+	0,4	9,7	9,525	3,18	Steel and Stainless Steel
CNMG 120404-SF RTC+	0,4	12,9	12,7	4,76	Steel and Stainless Steel
CNMG 120408-SF RTC+	0,8	12,9	12,7	4,76	Steel and Stainless Steel

Rinaldi-Tools

Indexable insert - DNMG...-SF RTC+

ab €4.70

Availability: 2147483647 In Stock

Shape	DNMG
Processing	Finish
Workpiece Material	Steel and Stainless Steel
Grade	RTC+: PVD coated P05-P15 Cermet grade for finishing of steel and stainless steel
Packaging unit	10 Pc.

	r	L	I.C	S	d
DNMG 110404-SF RTC+	0,4	11,6	9,525	4,76	3,81
DNMG 150604-SF RTC+	0,4	15,5	12,7	6,35	5,16
DNMG 150608-SF RTC+	0,8	15,5	12,7	6,35	5,16

Rinaldi-Tools

Indexable insert - CCGT ...-SF RTC+

ab €4.20

Availability: 2147483627 In Stock

Shape	CCGT
Processing	Finish
Worpiece Material	Steel and Stainless Steel
Grade	RTC+:PVD coated P05-P15 Cermet grade for finishing of steel and stainless steel
Packaging unit	10 Pc.

	r	L	I.C	S	d
CCGT 060202-SF RTC+	0,2	6,4	6,35	2,38	2,8
CCGT 060204-SF RTC+	0,4	6,4	6,35	2,38	2,8
CCGT 09T302-SF RTC+	0,2	9,7	9,525	3,97	4,4
CCGT 09T304-SF RTC+	0,4	9,7	9,525	3,97	4,4

Rinaldi-Tools

Indexable insert - DCGT ... -SF RTC+

ab €4.30

Availability: 2147483637 In Stock

Shape	DCGT
Processing	Finish
Workpiece Material	Steel and Stainless Steel
Grade	RTC+:PVD coated P05-P15 Cermet grade for finishing of steel and stainless steel
Packaging unit	10 Pc.

	r	L	I.C	S	d
DCGT 070202-SF RTC+	0,2	7,8	6,35	2,38	2,8
DCGT 070204-SF RTC+	0,4	7,8	6,35	2,38	2,8
DCGT 070208-SF RTC+	0,8	7,8	6,35	2,38	2,8
DCGT 11T302-SF RTC+	0,2	11,6	9,525	3,97	4,4
DCGT 11T304-SF RTC+	0,4	11,6	9,525	3,97	4,4
DCGT 11T308-SF RTC+	0,8	11,6	9,525	3,97	4,4